|Length||6.18 inches||157 millimeters|
|Width||3.27 inches||83 millimeters|
|Height||4.92 inches||125 millimeters|
|Height over Terminals||4.92 inches||125 millimeters|
|Approximate Weight||8.20 pounds||3.70 kilograms|
|Nominal Voltage:||6 Volts|
|20 hour rate||(1000mA to 5.25 volts)||20.0 AH|
|10 hour rate||(1800mA to 5.25 volts)||18.0 AH|
|5 hour rate||(3300mA to 5.10 volts)||16.5 AH|
|1 hour rate||(12300mA to 4.50 volts)||12.3 AH|
|Energy Density (20 hour rate)||1.21 Watt-hours/cubic inch||73.7 Watt-hours/l|
|Specific Energy (20 hour rate)||14.7 Watt-hours/pound||32.4 Watt-hours/kg|
|Internal Resistance (Fully Charged Battery)||12 milliohms (approx.)|
Cycle Applications: Limit initial current to 4000mA. Charge until battery voltage (under charge) reaches 7.20 to 7.35 volts at 68oF (20oC). Hold at 7.20 to 7.35 volts until current drops to approximately 200mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage.
"Float" or "Stand-by Service": Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.
Design by Sam Technology Co., Ltd.