|Length||5.23 inches||134 millimeters|
|Width||2.64 inches||67 millimeters|
|Height||2.36 inches||60 millimeters|
|Height over Terminals||2.60 inches||66 millimeters|
|Approximate Weight||2.60 pounds||1.20 kilograms|
|Nominal Voltage:||12 Volts|
|20 hour rate||(150mA to 10.50 volts)||3.40 AH|
|10 hour rate||(280mA to 10.50 volts)||3.00 AH|
|5 hour rate||(500mA to 10.20 volts)||2.80 AH|
|1 hour rate||(1850mA to 9.00 volts)||2.00 AH|
|Energy Density (20 hour rate)||1.10 Watt-hours/cubic inch||66.8 Watt-hours/l|
|Specific Energy (20 hour rate)||13.8 Watt-hours/pound||30.0 Watt-hours/kg|
|Internal Resistance (Fully Charged Battery)||60 milliohms (approx.)|
Cycle Applications: Limit initial current to 600mA. Charge until battery voltage (under charge) reaches 14.40 to 14.70 volts at 68oF (20oC). Hold at 14.40 to 14.70 volts until current drops to approximately 34mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage.
"Float" or "Stand-by Service": Hold battery across constant voltage source of 13.50 to 13.80 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.
Design by Sam Technology Co., Ltd.