12V 10Ah

 

 

General Specifications
Dimensions:
Length
5.95 inches
151 millimeters
Width
3.86 inches
98 millimeters
Height
3.74 inches
95 millimeters
Height over Terminals
3.98 inches
101 millimeters
Approximate Weight
9.04 pounds
4.10 kilograms
Electrical Specifications
Nominal Voltage:
12 Volts
Nominal Capacity:
20 hour rate
(500mA to 10.50 volts)
10.0 AH
10 hour rate
(900mA to 10.50 volts)
9.0 AH
5 hour rate
(1650mA to 10.20 volts)
8.3 AH
1 hour rate
(6000mA to 9.00 volts)
6.0 AH
Energy Density (20 hour rate)
1.36 Watt-hours/cubic inch
82.9 Watt-hours/l
Specific Energy (20 hour rate)
13.0 Watt-hours/pound
28.6 Watt-hours/kg
Internal Resistance (Fully Charged Battery)
30 milliohms (approx.)

 

Charging

Cycle Applications: Limit initial current to 2000mA. Charge until battery voltage (under charge) reaches 14.40 to 14.70 volts at 68oF (20oC). Hold at 14.40 to 14.70 volts until current drops to approximately 100mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage.

"Float" or "Stand-by Service": Hold battery across constant voltage source of 13.50 to 13.80 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.

 


 

back

products list

next

 

Design by Sam Technology Co., Ltd.